452
You can check the condition of the battery you are using on the LCD
monitor. Each Battery Pack LP-E6N/LP-E6 has a unique serial number,
and you can register multiple batteries to the camera. When you use
this feature, you can check the registered batteries’ remaining capacity
and operation history.
Select [Battery info.].
Under the [
5
3
] tab, select [
Battery
info.
], then press <
0
>.
The battery info. screen will appear.
3
Checking the Battery Information
Battery model or household power source
being used.
The battery level indicator (p.42) is
displayed together with the remaining
battery level shown in 1% increments.
The number of shots taken with the current
battery. The number is reset when the
battery is recharged.
Battery’s recharge performance level is
displayed in one of three levels.
(Green): Battery’s recharge
performance is fine.
(Green):
Battery’s recharge performance
is slightly degraded.
(Red) : Purchasing a new battery is
recommended.
Battery position
Using a genuine Canon Battery Pack LP-E6N/LP-E6 is recommended. If
you use batteries that are not genuine Canon products, this camera’s full
performance may not be attained or malfunction may result.
The shutter count is the number of still photos taken. (Movies are not
counted.)
The battery information will also be displayed when Battery Pack LP-
E6N/LP-E6 is used with Battery Grip BG-E14 (sold separately). If AA/R6
batteries are used, only the remaining battery level will be displayed.
If a battery communication error message is displayed, follow the
message.
To Next Page
Loading...
Need help?
General
