Clip Operations
114
Using the Clip Menu
1 Select a clip and then press SET.
• The clip menu appears. Available functions depend on the index screen and which functions are enabled.
2 Select the desired function and then press SET.
• The function is enabled. For some functions, further action may be required. Follow the onscreen directions.
• Press the CANCEL button instead to return to the clip index screen.
Displaying Clip Information
Select [Display Clip Info] in the clip menu to display the selected clip’s information screen ([Clip Info] screen).
Push the joystick left/right to switch to the previous/next clip. When you are finished, press the CANCEL button
to return to the clip index screen.
Displaying the User Memo
When displaying the [Clip Info] screen of a clip that has an embedded user memo, push the joystick up to display
it. Push the joystick down to return to the [Clip Info] screen.
Displaying Custom Picture Settings
When displaying the [Clip Info] screen of a clip that has a custom picture file recorded with it, push the joystick
down to display the first of three screens with the clip’s custom picture settings ([X Data 1/3] screen). Push the
joystick down to switch the [X Data 2/3] screen J [X Data 3/3] screen J [User Memo] screen J [Clip Info]
screen.
12
4
3
5
9
10
7
8
6
14 13 12 11
1 Thumbnail of the selected clip
2Shot mark (0 83)
3 Recording date and time
4Clip name (0 41)
5 Bit rate and resolution (0 45)
6 Special recording mode / Frame rate (0 85): For
slow & fast motion recording mode, the shooting
and playback frame rates will be displayed.
7 e mark / Z mark (0 115)
8 Embedded custom picture file (0 96)
9 Time code of the last frame in clip
10 Clip duration
11 Time code of the first frame in clip
12 Time code of the clip thumbnail
13 Thumbnail of the next clip
14 Thumbnail of the previous clip
To Next Page
Loading...
Need help?
General
Weight and Dimensions
