EasyManuals Logo

Canon XF105 User Manual

Canon XF105
180 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
37
Preparing Recording Media
4 Select [OK] and then press SET.
If you are using the [Complete] initialization option, press SET to cancel the operation while it is in progress.
You can use the SD card but all data will be erased.
5 When the confirmation message appears, press SET.
The SD card is initialized and all the data it contains is erased.
IMPORTANT
Initializing the recording media will permanently erase all data, including clips with an e mark, protected
photos, and custom picture information. Lost data cannot be recovered. Make sure you save important
recordings in advance.
Depending on the SD card, the complete initialization may take up to a few minutes.
NOTES
While recording on a CF card, you can initialize another CF card in the other CF card slot.
Switching Between the CF Card Slots
The camcorder features two CF card slots, CF card slot A (CFj) and CF
card slot B (CFl). If both slots contain a CF card, you can switch between
them as necessary.
Press the SLOT SELECT button.
The access indicator of the selected CF card slot will illuminate in green.
NOTES
If both CF card slots contain a CF card and you open the cover of the
selected slot, the camcorder will automatically switch to the other slot.
You cannot use the SLOT SELECT button to switch between CF card
slots while recording.
Selecting the CF Card Recording Method
The camcorder features two useful CF card recording methods, relay recording and double slot recording.
Relay recording: This allows you to continue recording on another CF card without interruption if the CF card you
are using becomes full. Relay recording is available from CF card slot A to CF card slot B, and vice versa.
Double slot recording: This records the same clip simultaneously to both CF cards, which is a convenient way to
make a backup copy of your recording while you record.
Operating modes:
Operating modes:
COPY

Table of Contents

Other manuals for Canon XF105

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Canon XF105 and is the answer not in the manual?

Canon XF105 Specifications

General IconGeneral
Sensor typeCMOS
Total megapixels2.37 MP
Optical sensor size1/1.3 \
Effective megapixels (image)2.07 MP
Filter size58 mm
Digital zoom- x
Optical zoom10 x
Image stabilizerYes
Focal length range4.25 - 42.5 mm
Interchangeable lens-
Image stabilizer typeOptical Image Stabilization (OIS)
Minimum aperture number1.8
Focal length (35mm film equivalent)30.4 - 304 mm
Memory slots2
Camcorder media typeMemory card
Disc types supportedNo
Compatible memory cardsCF, SD
Maximum memory card size128 GB
Internal storage capacity- GB
Focus adjustmentAuto/Manual
Closest focusing distance0.02 m
Camera shutter speed0.0005 s
Display diagonal3.5 \
Display resolution (numeric)920000 pixels
Viewfinder typeElectronic
Viewfinder screen size0.24 \
Camcorder typeHandheld camcorder
Image processorDIGIC DV III
Minimum illumination4.5 lx
Product colorBlack
Video resolutions1280 x 720, 1440 x 1080, 1920 x 1080 pixels
Maximum frame rate60 fps
Video formats supportedMXF
Maximum video resolution1920 x 1080 pixels
Maximum image resolution- pixels
PCM digital audio16-bit/48 kHz
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) out1
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity0
Battery voltage7.4 V
Battery capacity- mAh
Battery life (max)- h
Video recording time10.4 h
Operating temperature (T-T)0 - 40 °C
Cables includedComponent
Memory card includedCF
Video compression formatsMPEG2
Weight and Dimensions IconWeight and Dimensions
Depth250 mm
Width121 mm
Height148 mm
Weight1290 g

Related product manuals