Canon XF105 User Manual

Custom Picture Settings
96
Custom Picture Settings
You can preset a number of picture-related settings. After changing individual settings to your preference, you
can save the whole set in the camcorder or SD card as a custom picture file. You can then load the file at a later
date to change the current settings to the preset levels you selected. You can even embed the custom picture
settings in clips recorded to a CF card or photos recorded to an SD card. Conversely, you can have the
camcorder record clips and photos without embedding custom picture settings.
You can save up to 9 different custom picture files on the camcorder and up to 20 custom picture files on an SD
card. Custom picture files can be copied between the camcorder and recording media.
Custom preset files created with previous Canon camcorders are not compatible with this camcorder. Custom
picture files created with this camcorder are compatible with only the XF105 and XF100.
Available custom picture settings
Selecting Custom Picture Files
Select a custom picture file to apply its settings to your recordings or to
edit, rename, protect, or transfer it.
1 Open the [Custom Picture] submenu.
[l Camera Setup] [Custom Picture]
2 Select [K X Select File] and then press SET.
• A list of custom picture files in the camcorder and SD card appears. Files in the camcorder begin with [C1]
to [C9]; those on the SD card begin with [SD1] to [SD20].
3 Select the desired file and then press SET.
• To apply the file’s settings, press the MENU button to exit the menu. An icon representing the selected
custom picture file will appear on the left side of the screen.
• To perform other operations on the file, continue with the following procedures.
• Select [Off] to record without applying the custom picture file’s settings.
Operating modes:
Category Menu item Submenu 0
Settings related to light and dark
tones
[Gamma] 99
[Black Gamma] 100
[Black] [Master Pedestal] 99
[Master Black] 99
[Knee] All settings except [Saturation] 100
[Other Functions] [Setup Level] 103
[Clip at 100%] 103
Settings related to sharpness and
noise
[Sharpness] 101
[Noise Reduction] 101
[Skin Detail] 101
[Selective NR] 102
Settings related to color [Low Key Satur.] 100
[Knee] [Saturation] setting 100
[Color Matrix] 102
[White Balance] 102
[Color Correction] 103
[l Camera Setup]
[Custom Picture]
[K X Select File]
COPY

Canon XF105 Specifications

General

Sensor type	CMOS
Total megapixels	2.37 MP
Optical sensor size	1/1.3 \
Effective megapixels (image)	2.07 MP
Filter size	58 mm
Digital zoom	- x
Optical zoom	10 x
Image stabilizer	Yes
Focal length range	4.25 - 42.5 mm
Interchangeable lens	-
Image stabilizer type	Optical Image Stabilization (OIS)
Minimum aperture number	1.8
Focal length (35mm film equivalent)	30.4 - 304 mm
Memory slots	2
Camcorder media type	Memory card
Disc types supported	No
Compatible memory cards	CF, SD
Maximum memory card size	128 GB
Internal storage capacity	- GB
Focus adjustment	Auto/Manual
Closest focusing distance	0.02 m
Camera shutter speed	0.0005 s
Display diagonal	3.5 \
Display resolution (numeric)	920000 pixels
Viewfinder type	Electronic
Viewfinder screen size	0.24 \
Camcorder type	Handheld camcorder
Image processor	DIGIC DV III
Minimum illumination	4.5 lx
Product color	Black
Video resolutions	1280 x 720, 1440 x 1080, 1920 x 1080 pixels
Maximum frame rate	60 fps
Video formats supported	MXF
Maximum video resolution	1920 x 1080 pixels
Maximum image resolution	- pixels
PCM digital audio	16-bit/48 kHz
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) out	1
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
Battery voltage	7.4 V
Battery capacity	- mAh
Battery life (max)	- h
Video recording time	10.4 h
Operating temperature (T-T)	0 - 40 °C
Cables included	Component
Memory card included	CF
Video compression formats	MPEG2

Weight and Dimensions

Depth	250 mm
Width	121 mm
Height	148 mm
Weight	1290 g