To Next Page

To Previous Page

20070201

2. Graph draw/non-draw status [GRPH]-[SEL]

The following procedure can be used to specify the draw (On)/non-draw (Off) status of each

of the graphs in the graph menu.

u To specify the draw/non-draw status of a graph

1. Pressing 1(GRPH)4(SEL) displays the graph On/Off screen.

• Note that the StatGraph1 setting is for Graph 1 (GPH1 of the graph menu), StatGraph2

is for Graph 2, and StatGraph3 is for Graph 3.

2. Use the cursor keys to move the highlighting to the graph whose status you want to

change, and press the applicable function key to change the status.

• {On}/{Off} ... {On (draw)}/{Off (non-draw)}

• {DRAW} ... {draws all On graphs}

3. To return to the graph menu, press J.

6-1-4

Before Performing Statistical Calculations

# V-Window parameters are normally set

automatically for statistical graphing. If you

want to set V-Window parameters manually,

you must change the Stat Wind item to

“Manual”.

While the statistical data list is on the display,

perform the following procedure.

!m(SET UP)2(Man)

J(Returns to previous menu.)

Note that V-Window parameters are set

automatically for the following types of graphs

regardless of whether or not the Stat Wind

item is set to “Manual”.

1-Sample Z Test, 2-Sample Z Test, 1-Prop Z

Test, 2-Prop Z Test, 1-Sample

t Test, 2-Sample

t Test, χ

Test, 2-Sample F Test ( x-axis only

disregarded).

# The default setting automatically uses List 1

data as

x-axis (horizontal) values and List 2

data as

y-axis (vertical) values. Each set of x/y

data is a point on the scatter diagram.

Casio fx-9860G Series User Manual

Questions and Answers: