20070201
10-6-8
eActivity Guide
u To exit the guide creation mode
1. While creating a guide, press 4(END).
• This will display the dialog box shown to the right.
• 1(Yes) ... Turns on the exit strip setting. When using the guide as a demo, the strip
is exited and the eActivity workspace screen returns to the display after
the guide is complete.
• 6(No) ... Turns off the exit strip setting. The strip is not exited when the guide is
complete. Select this option when you want students to continue operation
using the strip after the guide is complete.
2. Press 1(Yes) or 6(No).
• Exits the guide creation operation and returns to the eActivity workspace screen.
# An ongoing guide creation operation can be
cancelled by pressing !a('). The exit
strip dialog box will not appear when a guide
creation operation is cancelled.
# Guide creation also canceled if the m key
is pressed to change to another mode while
a guide creation operation is in progress. The
exit strip dialog box will not appear in this
case, either.
# The amount of memory used by strips is
calculated when you press 1(Yes) or 6(No).
See “To display the strip memory usage screen”
(page 10-5-1) for more information.
# You cannot exit a guide creation operation while
the application list (page 10-3-13) is on the
display. Select an application on the application
list or close the application list, and then exit
guide creation.
To Next Page
Loading...
Need help?
General
