20070201
9-8-2
Using Memory in the S
•
SHT Mode
k Saving Spreadsheet Data to List Memory
You can use the following procedure to select a series of cells in a particular column or row
and save their data to List Memory (List 1 through List 26).
u To save the contents of a range of cells to List Memory
1. Select the range of cells whose data you want to save in List Memory.
• You can select a series of cells in a column or a series of cells in a line. Selecting any
other confi guration of cells will cause an error.
2. Press 6(g)3(STO)2(LIST).
• The “Cell Range” setting will show the range of cells
you selected in step 1.
3. Press c to move the highlighting to “List [1~26]”.
4. Enter a list number in the range of 1 to 26, and then press w.
5. Press 6(EXE) or the w key to save the data in the List Memory.
• If the List Memory you select already has data assigned to it, the new data will replace
the existing data.
k Saving Spreadsheet Data to File Memory
You can use the following procedure to select a range of cells and save their data to File
Memory (File 1 through File 6). Data is saved sequentially from left to right, line by line, and
each column is saved as a File Memory list (List 1 through List 26).
The following shows how spreadsheet data in the range of A1:C3 is saved to File 6.
Spreadsheet File Memory
⇒
File6
List2 List3List1
231
564
897
⇒
File6
List2 List3List1
231
564
897
# The value in any cell that is empty, contains
text, or has ERROR displayed is changed
to 0 when you perform step 5 of the above
procedure.
To Next Page
Loading...
Need help?
General
