20070201
9-4 Inputting and Editing Cell Data
This section explains how to input and edit formulas, text, and other spreadsheet cell data. It
covers how to copy, insert, and delete cells.
Note that the S
•
SHT mode does not support complex number data.
k Basic Cell Data Input
You need to enter the edit mode in order to input data into a cell. There are two different
methods you can use to enter the edit mode, and the method you should use depends on
whether you want to input new data or edit the cell’s existing data.
When you want to do this: Use this method:
Replace the cell’s current contents with your
new input.
Select the cell and then start inputting.
Retain the cell’s current contents to edit or
add to it.
Select the cell and then press 2(EDIT)
3(CELL). Next, edit the cell contents as
desired.
Normally, the contents of the cell
where the cell cursor is located are
displayed fl ush right in the edit box
(input and editing disabled).
⇒⇒
9-4-1
Inputting and Editing Cell Data
In the edit mode, the cell’s contents
change to fl ush left, to indicate that
input and editing are enabled.
To Next Page
Loading...
Need help?
General
