20070201
9-7-1
Using the CALC Function
9-7 Using the CALC Function
This section explains how to use the CALC function to perform statistical calculations on
spreadsheet data.
k Overview
Except for selection of the data, the statistical calculation operations you can use in the
S • SHT mode are basically the same as those in the STAT mode. This section explains the
differences between the S • SHT mode statistical calculation functions and the STAT mode
statistical calculation functions.
u Displaying the CALC Submenu
Press 6(g)2(CALC) to display the CALC submenu.
The functions on the CALC submenu are the same as those that appear when you press
2(CALC) in the STAT mode List Editor. The following explains each function and where
you need to go to fi nd out more for them.
Key Description Go here for more details:
1(1VAR)
Press to perform single-variable statistical
calculations.
“Single-Variable Statistical
Calculations” (page 6-4-2)
2(2VAR)
Press to perform paired-variable statistical
calculations.
“Paired-Variable Statistical
Calculations” (page 6-4-2)
3(REG)
Press to perform regression calculations.
“Regression Calculation”
(page 6-4-3)
6(SET)
Displays a screen for specifying data to be
used for the statistical calculations performed
by pressing 1(1VAR), 2(2VAR), and
3(REG).
“Confi guring Statistical
Calculation Data Settings”
(page 9-7-2)
The functions of function menu keys 1 through 3 are basically the same as the STAT
mode function menu. The settings you can confi gure with 6(SET) are different from those
in the STAT mode.
To Next Page
Loading...
Need help?
General
