20070201
1-3 Inputting and Editing Calculations
Note
• Unless specifi cally noted otherwise, all of the operations in this section are explained using the
Linear input mode.
k Inputting Calculations
When you are ready to input a calculation, fi rst press A to clear the display. Next, input your
calculation formulas exactly as they are written, from left to right, and press w to obtain the
result.
Example 1 2 + 3 – 4 + 10 =
Ac+d-e+baw
Example 2 2(5 + 4) ÷ (23 × 5) =
Ac(f+e)/
(cd*f)w
k Editing Calculations
Use the d and e keys to move the cursor to the position you want to change, and then
perform one of the operations described below. After you edit the calculation, you can
execute it by pressing w. Or you can use e to move to the end of the calculation and
input more.
u To change a step
Example To change cos60 to sin60
Acga
ddd
D
s
1-3-1
Inputting and Editing Calculations
To Next Page
Loading...
Need help?
General
