Cisco 4500M User Manual

6-14
Software Configuration Guide—Release 12.2(25)EW
OL-6696-01
Chapter 6 Configuring Supervisor Engine Redundancy Using RPR and SSO
Manipulating Bootflash on the Redundant Supervisor Engine
Manipulating Bootflash on the Redundant Supervisor Engine
Note The console port on the redundant supervisor engine is not available.
To manipulate the redundant supervisor engine bootflash, perform one or more of the following tasks:
Command Purpose
Switch# dir slaveslot0: target_filename
Or:
Switch# dir slavebootflash: target_filename
Lists the contents of the slot0: device on the redundant
supervisor engine.
Lists the contents of the bootflash: device on the redundant
supervisor engine.
Switch# delete slaveslot0: target_filename
Or:
Switch# delete slave bootflash: target_filename
Deletes specific files from the slot0: device on the redundant
supervisor engine.
Deletes specific files from the bootflash: device on the
redundant supervisor engine.
Switch# squeeze slaveslot0: target_filename
Or:
Switch# squeeze slavebootflash: target_filename
Squeezes the slot0: device on the redundant supervisor
engine.
Squeezes the bootflash: device on the redundant supervisor
engine.
Switch# format slaveslot0: target_filename
Or:
Switch# format slavebootflash: target_filename
Formats the slot0: device on the redundant supervisor engine.
Formats the bootflash: device on the redundant supervisor
engine.
Switch# copy source_device : source_filename
slaveslot0:
target_filename
Or:
Switch# copy source_device : source_filename
slavebootflash:
target_filename
Copies a file from the active supervisor engine to the slot0:
device on the redundant supervisor engine.
Copies a file to the bootflash: device on a redundant
supervisor engine.
Note Source could be the active supervisor engine or a TFTP server.

Cisco 4500M Specifications

General

Brand	Cisco
Model	4500M
Category	Network Router
Language	English