Cisco ASR 1001-X User Manual

This completes the USB Flash memory installation procedure.
Removing and Replacing the Cisco ASR 1001-X Router DIMM
This section describes how to replace the DIMMs on the Cisco ASR 1001-X Router.
The Cisco ASR 1001-X Router supports an 8-GB and 16-GB configuration.Note
You might have to upgrade a DIMM for the following reasons:
•
You have upgraded to a new Cisco IOS feature set or release that requires more memory.
•
You are using very large routing tables or many protocols.
Removing and Replacing the Cisco ASR 1001-X Router DIMM Memory Module
Perform the following steps before you begin the process of removing and replacing a DIMM memory module:
•
Use an ESD-preventive wrist strap.
•
Back up the data that you want to save.
•
Remove the power supplies before you remove the chassis top cover.
The top cover cannot be removed until the power supplies are removed from the chassis. The chassis has
a safety mechanism built in to prevent the removal of the top cover until the power supplies are removed.
Caution
•
The DIMM component is keyed and slotted for easier connection.
•
The Cisco ASR 1001-X Router has two DIMM slots.
The below table shows the slots that are supported for inserting the memory DIMMs in the Cisco ASR1001-X
Router.
Table 23: Supported Slots for Inserting the DIMMs
Slot 1 (U103D)Slot 0 (U101D)Memory PID Option
4 GB4 GBU1D0
8 GB8 GBU1D1
Cisco ASR 1001-X Router Hardware Installation Guide
102
Removing and Replacing FRUs from the Cisco ASR 1001-X Router
Removing and Replacing the Cisco ASR 1001-X Router DIMM

Cisco ASR 1001-X Specifications

General

Product color	Gray
Rack capacity	1U
Rack mounting	Yes
Networking standards	-
Ethernet LAN (RJ-45) ports	6
Installed SFP modules quantity	2
Flash memory	1024 MB
Internal memory	8192 MB
Processor cores	4
AC input voltage	85 - 264 V
Power source type	AC
Power consumption (typical)	250 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 90 %
Security algorithms	AES

Weight and Dimensions

Depth	461.5 mm
Width	439.42 mm
Height	43.43 mm
Weight	10590 g