Copyright (c) 1994-2014 by cisco Systems, Inc.
Current image running: *Upgrade in progress* Boot ROM0
Last reset cause: BootRomUpgrade
ASR1001-X platform with 8388608 Kbytes of main memory
From here, you can manually reload from the ROMMON prompt, or let the router auto boot directly to
Cisco IOS.
Note
The show platform command displays the upgraded version of the ROMMON:
Router# show platform
Chassis type: ASR1001-X
Slot Type State Insert time (ago)
--------- ------------------- --------------------- -----------------
0 ASR1001-X ok 17:51:08
0/0 BUILT-IN-2T+6X1GE ok 17:50:18
0/1 SPA-1X10GE-L-V2 ok 17:50:18
R0 ASR1001-X ok 17:51:08
R0/0 ok, active 17:51:08
R0/1 ok, standby 17:49:51
F0 ASR1001-X ok, active 17:51:08
P0 ASR1001X-PWR-AC ok 17:50:44
P1 ASR1001X-PWR-AC ok 17:50:42
P2 ASR1001-X-FANTRAY ok 17:50:45
Slot CPLD Version Firmware Version
--------- ------------------- ---------------------------------------
0 14022717 15.4(2r)S << New ROMmon is confirmed
R0 14022717 15.4(2r)S
F0 14022717 15.4(2r)S
Compatible ROMMON Releases
For information about the compatibility between ROMMON releases and the Cisco ASR 1001-X Router, see
the “ ROMMON Release Requirements ” section in the Cisco ASR 1000 Series Aggregation Services Routers
Release Notes .
Resolved Caveats
For information about the resolved caveats in each ROMMON release, see the “ Resolved Caveats ” section
in the Cisco ASR 1000 Series Aggregation Services Routers Release Notes .
Hardware the Require a CPLD Upgrade
The Cisco ASR 1001-X Router has the capability to allow users to perform Complex Programmable Logic
Device (CPLD) upgrades in the field.
For details about Cisco ASR 1000 Series Aggregation Services Router hardware configuration combinations
that require a CPLD field-programmable upgrade for components, see Upgrading Field Programmable
Hardware Devices for Cisco ASR 1000 Series Routers .
Cisco ASR 1001-X Router Hardware Installation Guide
75
Upgrading the ROMMON and CPLD
Compatible ROMMON Releases