Cisco ASR 1001-X User Manual

CHAPTER 3
Preparing Your Site for Installation
This chapter contains important safety information you should know before working with the Cisco ASR
1001-X Router, and guides you through the process of preparing your site for router installation.
This chapter contains the following sections:
•
Prerequisites and Preparation , page 23
•
Safety Guidelines , page 24
•
Compliance Requirements, page 25
•
Cautions and Regulatory Compliance Statements for NEBS , page 26
•
Standard Warning Statements, page 27
•
Site Planning, page 31
•
Preventing Electrostatic Discharge Damage, page 40
•
Electrical Safety, page 41
•
Chassis-Lifting Guidelines, page 41
•
Tools and Equipment, page 42
•
Checking the Shipping Container Contents, page 43
•
Cisco ASR 1001-X Router Installation Checklist, page 44
Prerequisites and Preparation
Before you perform the procedures in this guide, we recommend that you:
•
Read the safety guidelines in the next section and review the electrical safety and ESD-prevention
guidelines in this guide.
• Ensure that you have all of the necessary tools and equipment (see the “Tools and Equipment”section).
•
Ensure that you have access to the Cisco ASR 1000 Series Aggregation Services Routers Software
Configuration Guide (an online document that is available for viewing or download at Cisco.com) during
the installation.
Cisco ASR 1001-X Router Hardware Installation Guide
23

Cisco ASR 1001-X Specifications

General

Product color	Gray
Rack capacity	1U
Rack mounting	Yes
Networking standards	-
Ethernet LAN (RJ-45) ports	6
Installed SFP modules quantity	2
Flash memory	1024 MB
Internal memory	8192 MB
Processor cores	4
AC input voltage	85 - 264 V
Power source type	AC
Power consumption (typical)	250 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 90 %
Security algorithms	AES

Weight and Dimensions

Depth	461.5 mm
Width	439.42 mm
Height	43.43 mm
Weight	10590 g