Cisco ASR 1001-X User Manual

1PPS (input and output)10 Mhz (input and output)Signal Attribute
50 ohms50 ohmsImpedance
26 microseconds50% duty cyclePulse Width
40 nanoseconds
Input—AC coupled
Output—5 nanoseconds
Rise Time
Cisco ASR 1002-X Router Time of Day Port Pinout
Table 46: RJ45 1PPS/ToD Port Pinout
DescriptionDirectionSignal NamePin
1PPS RS422 signalOutput or Input1PPS_P1
1PPS RS422 signalOutput or Input1PPS_N2
Do not use this pin.OutputRESERVED3
GND4
Time of Day characterGND5
Do not use this pin.InputRESERVED6
Time of Day characterOutput or InputTOD_P7
Time of Day characterOutput or InputTOD_N8
Cisco ASR 1013 Router Specifications
This section lists the specifications for the Cisco ASR 1013 Router. The following table lists the Cisco ASR
1013 Router physical specifications.
Table 47: Cisco ASR 1013 Router Specifications
SpecificationDescription
Connects Cisco ASR1000-RP2, Cisco ASR 1000-ESP40 or Cisco
ASR 1000-ESP100, Cisco ASR1000-SIP10 and Cisco
ASR1000-SIP40, and power supplies together in the system
Midplane
Cisco ASR 1001-X Router Hardware Installation Guide
133
Cisco ASR 1001-X Router Specifications
Cisco ASR 1002-X Router Time of Day Port Pinout

Cisco ASR 1001-X Specifications

General

Product color	Gray
Rack capacity	1U
Rack mounting	Yes
Networking standards	-
Ethernet LAN (RJ-45) ports	6
Installed SFP modules quantity	2
Flash memory	1024 MB
Internal memory	8192 MB
Processor cores	4
AC input voltage	85 - 264 V
Power source type	AC
Power consumption (typical)	250 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 90 %
Security algorithms	AES

Weight and Dimensions

Depth	461.5 mm
Width	439.42 mm
Height	43.43 mm
Weight	10590 g