Cisco ASR 1001-X User Manual

CHAPTER 2
Cisco ASR 1001-X Router Supported Hardware
Components
This chapter contains information about the supported hardware components on the Cisco ASR 1001-X
Router, and contains the following sections:
•
Supported Hardware Components, page 11
•
Supported Half-Height SPAs, page 12
•
Supported Small Form-Factor Pluggable (SFP and SFP+) Transceivers, page 14
•
Supported NIMs, page 15
•
Cisco ASR 1001-X Router Power Supplies, page 17
Supported Hardware Components
The following table lists the hardware components supported on the Cisco ASR 1001-X Router.
Table 2: Supported Hardware Components
DescriptionComponent
1 RU form factorChassis
Six built-in Gigabit Ethernet and two built-in
10-Gigabit Ethernet ports
Ethernet Ports
A nonmodular, fixed ESP with a default throughput
of 2.5 Gbps, which is upgradable with a
software-activated performance license of 5 Gbps,
10 Gbps, or 20 Gbps.
ESP
Single integrated route processorRoute Processor
Integrated SIPSIP
Cisco ASR 1001-X Router Hardware Installation Guide
11

Cisco ASR 1001-X Specifications

General

Product color	Gray
Rack capacity	1U
Rack mounting	Yes
Networking standards	-
Ethernet LAN (RJ-45) ports	6
Installed SFP modules quantity	2
Flash memory	1024 MB
Internal memory	8192 MB
Processor cores	4
AC input voltage	85 - 264 V
Power source type	AC
Power consumption (typical)	250 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 90 %
Security algorithms	AES

Weight and Dimensions

Depth	461.5 mm
Width	439.42 mm
Height	43.43 mm
Weight	10590 g