Cisco ASR 1001-X User Manual

You must observe the following safety guidelines when working with any equipment that connects to electrical
power or telephone wiring. These guidelines help you avoid injuring yourself or damaging the devices.
The NEBS information is for reference. The Cisco ASR 1001-X Router is not NEBS certified.Note
Table 10: Compliance Requirements
EMC/Safety Compliance and NEBS Requirements
DescriptionSpecification
Shielded twisted pair T1/E1 cables must
be used with the 8-port channelized T1/E1
SPA interfaces in any Cisco ASR 1000
chassis. This is required for compliance
with Class A emission requirements for
EMC.
Caution
Shielded twisted pair T1/E1 cables must
be used with any of the T1/E1 NIM
interfaces in any Cisco ASR 1000 chassis.
This is required for compliance with Class
A emission requirements for EMC.
Caution
EMC/Safety
To comply with the Telcordia GR-1089
NEBS standard for electromagnetic
compatibility and safety, for Ethernet
RJ-45 ports, use only shielded Ethernet
cables that are grounded on both ends. In
a NEBS installation, all Ethernet ports are
limited to intrabuilding wiring.
CautionTelcordia NEBS GR-1089-Core Statement
The English warnings in this document are followed by a statement number. To see the translations of a
warning in other languages, look up its statement number in Regulatory, Compliance, and Safety Information
for the Cisco Aggregation Services Router 1000 Series .
Note
Cautions and Regulatory Compliance Statements for NEBS
The following table lists cautions, regulatory compliance statements, and requirements for the Network
Equipment-Building System (NEBS) certification from the Telcordia Electromagnetic Compatibility and
Electrical Safety – Generic Criteria for Network Telecommunications Equipment (A Module of LSSGR,
FR-64; TSGR, FR-440; and NEBSFR, FR-2063) Telcordia Technologies Generic Requirements,
GR-1089-CORE.
Attach an ESD-preventive wrist strap to your wrist and to a bare metal surface.
Cisco ASR 1001-X Router Hardware Installation Guide
26
Preparing Your Site for Installation
Cautions and Regulatory Compliance Statements for NEBS

Cisco ASR 1001-X Specifications

General

Product color	Gray
Rack capacity	1U
Rack mounting	Yes
Networking standards	-
Ethernet LAN (RJ-45) ports	6
Installed SFP modules quantity	2
Flash memory	1024 MB
Internal memory	8192 MB
Processor cores	4
AC input voltage	85 - 264 V
Power source type	AC
Power consumption (typical)	250 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 90 %
Security algorithms	AES

Weight and Dimensions

Depth	461.5 mm
Width	439.42 mm
Height	43.43 mm
Weight	10590 g