Name: Cisco ASR 1001-X
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

DescriptionPID

2-Port Clear Channel T3/E3 SPA, Version 2SPA-2XT3/E3-V2

4-Port Clear Channel T3/E3 SPA, Version 2SPA-4XT3/E3-V2

8-Port Channelized T1/E1 SPA, Version 2SPA-8XCHT1/E1-V2

There is a limitation for clock switchover scenarios between the Cisco ASR 1001-X Router's built-in ports and the SPA-2X1GE-SYNCE. All the other

functionalities on the SPA-2X1GE-SYNCE are supported.

Supported Small Form-Factor Pluggable (SFP and SFP+)

Transceivers

The tables below list the supported SFP optics and SFP copper interfaces on the Cisco ASR 1001-X Router.

Table 4: Supported 1 GE SFP Optics and SFP Copper Interfaces

DescriptionPID

1000BASE-SX SFP (DOM)SFP-GE-S

1000BASE-SX SFP transceiver module, MMF,

850nm, DOM

GLC-SX-MMD

1000BASE-LX/LH SFP (DOM)SFP-GE-L

1000BASE-LX/LH SFP transceiver module,

MMF/SMF, 1310nm, DOM

GLC-LH-SMD

1000BASE-ZX Gigabit Ethernet SFP (DOM)SFP-GE-Z

1000BASE-T SFP (NEBS 3 ESD)SFP-GE-T

1000BASE-BX SFP, 1310NMGLC-BX-U

1000BASE-BX SFP, 1490NMGLC-BX-D

1000BASE-T SFP transceiver module for category

5 copper wire

GLC-TE

GE SFP, LC connector SX transceiverGLC-SX-MM

GE SFP, LC connector LX/LH transceiverGLC-LH-SM

GE SFP, LC Connector, EX transceiverGLC-EX-SMD

Cisco ASR 1001-X Router Hardware Installation Guide

Cisco ASR 1001-X Router Supported Hardware Components

Supported Small Form-Factor Pluggable (SFP and SFP+) Transceivers

Cisco ASR 1001-X Specifications

General

Product color	Gray
Rack capacity	1U
Rack mounting	Yes
Networking standards	-
Ethernet LAN (RJ-45) ports	6
Installed SFP modules quantity	2
Flash memory	1024 MB
Internal memory	8192 MB
Processor cores	4
AC input voltage	85 - 264 V
Power source type	AC
Power consumption (typical)	250 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 90 %
Security algorithms	AES