Cisco ASR 1001-X User Manual

CHAPTER 9
Cisco ASR 1001-X Router Signals and Pinouts
This appendix provides the Cisco ASR 1001-X Router signals and pinout specifications.
•
Management Ethernet Port Signals and Pinouts, page 141
•
Console Port Signals and Pinouts, page 142
•
Auxiliary Port Signals and Pinouts, page 142
Management Ethernet Port Signals and Pinouts
Table 56: RJ-45 Management Ethernet Port Pinouts , on page 141 lists the Management Ethernet 10/100 RJ-45
port pinouts.
Table 56: RJ-45 Management Ethernet Port Pinouts
DescriptionDirectionSignalPin
T/R data +I/OTX/RX AData +1
T/R data -I/OtTX/RX AData -2
T/R Data +I/OTX/RX BData +3
T/R Data + (Unused for
10/100)
I/OTX/RX CData +4
T/R Data - (Unused for
10/100)
I/OTX/RX CData -5
T/R Data -I/OTX/RX BData -6
T/R Data + (Unused for
10/100)
I/OTX/RX DData +7
T/R Data - (Unused for
10/100)
I/OTX/RX DData -8
Cisco ASR 1001-X Router Hardware Installation Guide
141

Cisco ASR 1001-X Specifications

General

Product color	Gray
Rack capacity	1U
Rack mounting	Yes
Networking standards	-
Ethernet LAN (RJ-45) ports	6
Installed SFP modules quantity	2
Flash memory	1024 MB
Internal memory	8192 MB
Processor cores	4
AC input voltage	85 - 264 V
Power source type	AC
Power consumption (typical)	250 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 90 %
Security algorithms	AES

Weight and Dimensions

Depth	461.5 mm
Width	439.42 mm
Height	43.43 mm
Weight	10590 g