Cisco ASR 1001-X User Manual

Fan group 1 speed: 60%
Fan 0: Normal
Fan 1: Normal
Fan 2: Normal
Fan 3: Fail
Reporting Functions
The chassis manager on the forwarding engine control processor manages the local resources of the forwarding
processor. The Cisco ASR 1001-X Router displays warning messages on the console if the chassis
interface-monitored parameters exceed a threshold. You can also retrieve and display environmental status
reports with the following commands:
•
show environment all
•
show version
•
show inventory
•
show platform
•
show platform software status control-processor
•
show diag
Parameters are measured and reporting functions are updated every 60 seconds. A brief description of each
of these commands follows.
The show environment all command displays temperature, voltage, fan, and power supply information.
The following is sample output from the show environment all command.
show environment all Command
Router# show environment all
Sensor List: Environmental Monitoring
Sensor Location State Reading
PEM Iout P0 Normal 6 A
PEM Vout P0 Normal 12 V DC
PEM Vin P0 Normal 117 V AC
Temp: PEM In P0 Normal 35 Celsius
Temp: PEM Out P0 Normal 32 Celsius
Temp: PEM Int P0 Normal 37 Celsius
PEM Iout P1 Normal 6 A
PEM Vout P1 Normal 12 V DC
PEM Vin P1 Normal 117 V AC
Temp: PEM In P1 Normal 31 Celsius
Temp: PEM Out P1 Normal 27 Celsius
Temp: PEM Int P1 Normal 31 Celsius
VVM 0: VX1 R0 Normal 1502 mV
VVM 0: VX2 R0 Normal 751 mV
VVM 0: VX3 R0 Normal 1004 mV
VVM 0: VX4 R0 Normal 1055 mV
VVM 0: VX5 R0 Normal 901 mV
VVM 0: VP1 R0 Normal 5096 mV
VVM 0: VP3 R0 Normal 1505 mV
VVM 0: VP4 R0 Normal 1792 mV
VVM 0: VH R0 Normal 11940 mV
VVM 1: VX1 R0 Normal 1203 mV
VVM 1: VX2 R0 Normal 859 mV
VVM 1: VX3 R0 Normal 857 mV
Cisco ASR 1001-X Router Hardware Installation Guide
66
Cisco ASR 1001-X Router Power Up and Initial Configuration
Reporting Functions

Cisco ASR 1001-X Specifications

General

Product color	Gray
Rack capacity	1U
Rack mounting	Yes
Networking standards	-
Ethernet LAN (RJ-45) ports	6
Installed SFP modules quantity	2
Flash memory	1024 MB
Internal memory	8192 MB
Processor cores	4
AC input voltage	85 - 264 V
Power source type	AC
Power consumption (typical)	250 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 90 %
Security algorithms	AES

Weight and Dimensions

Depth	461.5 mm
Width	439.42 mm
Height	43.43 mm
Weight	10590 g