You can also determine the UDI information using the show running-config command, for example:
Router# show running-config
.
.
.
license udi pid ASR1001-X sn myroutersn123
Table 20: show running-config Command Output Description
DescriptionField Name
License identifier information (also displayed with
the show license udi command).
license udi pid ASR1001-X sn myroutersn123
Use the show license all command to display all the applicable licenses in both Primary License Storage and
Built In License Storage.
Primary License Storage stores the currently purchased and installed licenses.Note
The following example displays sample output from the show license all command:
router# show license all
License Store: Primary License Storage
StoreIndex: 0 Feature: interface_10g Version: 1.0
License Type: Permanent
License State: Active, In Use
Lock type: Node locked
V
endor
info:
<UDI><PID>ASR1001-X</PID><SN>JAE17450EUZ</SN></UDI>
License Addition: Exclusive
License Generation version: 0x8100000
License Count: 2/0/0 (Active/In-use/Violation)
License Priority: Medium
License Store: Built-In License Storage
StoreIndex: 0 Feature: adventerprise Version: 1.0
License Type: RightToUse
License State: Active, In Use
Lock type: Non Node locked
V
endor
info:
<UDI><PID>NOTLOCKED</PID><SN>NOTLOCKED</SN></UDI><T>R
TU</T>
License Addition: Additive
License Generation version: 0x8200000
Cisco ASR 1001-X Router Hardware Installation Guide
82
Cisco ASR 1001-X Router License Verification
Viewing License Information
To Next Page
Loading...
Need help?
General
Weight and Dimensions
