7-19
Cisco SCE8000 GBE Installation and Configuration Guide
Chapter 7 Basic Cisco SCE 8000 Platform Operations
Displaying the System Uptime
Displaying the System Uptime
Use this command to see how long the system has been running since the last reboot.
At the SCE8000> prompt, enter show system-uptime and press Enter.
Example for Displaying the System Uptime
The following example shows how to display the system uptime of the SCE platform.
SCE8000# show system-uptime
Cisco SCE8000 uptime is 21 minutes, 37 seconds
To Next Page
Loading...
Need help?
General
