Cisco SCE 8000 User Manual

C-41
Cisco SCE8000 GBE Installation and Configuration Guide
Appendix C Cisco Service Control Engine System Log Messages
Warning Messages, Severity Level 4
Error Message %LOCAL7-6-APP_MAIN_STARTED: "SCE Application main process starting
init phase."
Explanation
This debug message is displayed when the Cisco SCE application’s main process starts
the initialization phase.
Recommended Action None.
Warning Messages, Severity Level 4
Warning Message %LOCAL7-4-DBG_FLUSH_FILES_FAILED: "DBG failure
Explanation
This message is generated when an error occurs while flushing the current debug or
statistics log file.
Recommended Action None.
Warning Message %LOCAL7-4-DBG_SCROLL_TO_END_FAILED: "DBG failure
Explanation
This message is generated when an error occurs while scrolling the current DBG log file
till the end.
Recommended Action None.
Warning Message %LOCAL7-4-DBG_FILL_HEADER_FAILED: "DBG failure: Failed to fill
header."
Explanation
This message is generated when a user tries to perform a write operation of a header for
the DBG or statistics log file that does not exist.
Recommended Action None.
Warning Message %LOCAL7-4-DBG_SET_STATE_FAILED: "DBG failure
Explanation
This warning message is displayed when a user tries to change the state of a DBG or
statistics log file that does not exist.
Recommended Action None.
Warning Message %LOCAL7-4-DBG_SCROLL_TO_NEXT_FAILED1: "DBG failure
Explanation
This message is generated when the current DBG or statistics log file cannot be opened
when a user tries to scroll the file.
Recommended Action None.

Cisco SCE 8000 Specifications

General

Brand	Cisco
Model	SCE 8000
Category	Switch
Language	English