Cisco SCE 8000 User Manual

2-18
Cisco SCE8000 GBE Installation and Configuration Guide
Chapter 2 Introduction to the Cisco SCE 8000 10 GBE Platform
Checking the Shipping Container Contents
Checking the Shipping Container Contents
Use the Cisco SCE 8000 Component List to check the contents of the Cisco SCE 8000 platform shipping
container.
Tip Do not discard the shipping container when you unpack the Cisco SCE 8000. Flatten the shipping cartons
and store them with the pallet. You need these containers to move or ship the Cisco SCE 8000.
Cisco SCE 8000 Component and Accessory Lists
Table 2-10 lists the Cisco SCE 8000 components.
Table 2-11 lists the Cisco SCE 8000 accessories.
Table 2-10 Cisco SCE 8000 Component List
Component Description
Cisco SCE 8000-SCM-E Cisco SCE 8000 Service Control Module.
Cisco SCE 8000-SIP Cisco SCE 8000 SPA Jacket card Interface Processor.
2 or 4 SPA Jacket cards SPA Interface. See the following list of supported SPA
models.
2 or 4 XFP OpticsXFP optic modules. See the following list of supported XFP models.
2 Cisco PWR-2700-AC/4 or
2 Cisco PWR-2700-DC/4
Cisco power supply units, AC or DC.
Hot swappable, redundant power supply.
Cisco SCE 8000-FAN Redundant fans unit.
Table 2-11 Cisco SCE 8000 Accessory List
Accessory Description
Management cables
• Gigabit Ethernet cable for connecting to the
Management ports
• RS-232 serial cables (DB-9 to RJ-45 and DB-25 to
RJ-45) for connecting to a local terminal
Power cables Two AC power supply cords, if ordered with AC-input power
supply units
Grounding kit 69-0815-01
• Grounding lug
• Two M4 hex-head screws with locking washers
Optical Bypass module kit
• Optical Bypass Module
• Control Cable (2 m)
• Control Cable (40 cm)

Cisco SCE 8000 Specifications

General

Brand	Cisco
Model	SCE 8000
Category	Switch
Language	English