Cisco SCE 8000 User Manual

2-8
Cisco SCE8000 GBE Installation and Configuration Guide
Chapter 2 Introduction to the Cisco SCE 8000 10 GBE Platform
Modular Optics
Modular Optics
The SPAs implement 10 GBE small form-factor pluggable (XFP) optical transceivers to provide network
connectivity (See Figure 2-5). An XFP module is a transceiver device that mounts into the front panel to
provide network connectivity.
Note It is highly recommended to use only the XFP modules listed as supported in this document. Use of
unsupported or unqualified XFP modules may affect reliability or operation.
Figure 2-5 10 GBE Small Form-factor Pluggable (XFP0)
The interface connector on the 1-Port 10-Gigabit Ethernet SPA is a fiber optic receiver that supports one
XFP.
The types of optics modules that have been qualified for use with the 1-Port 10-Gigabit Ethernet SPA on
the Cisco SCE 8000 platform are as follows:
• XFP-10GLR-OC192SR
• XFP-10GER-OC192IR
• XFP-10GZR-OC192LR
• XFP-10G-MM-SR
129499

Cisco SCE 8000 Specifications

General

Brand	Cisco
Model	SCE 8000
Category	Switch
Language	English