Cisco SCE 8000 User Manual

9-31
Cisco SCE8000 GBE Installation and Configuration Guide
Chapter 9 Removal and Replacement Procedures
SPA Installation and Removal
SPA Installation and Removal
Warning During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly
touch the backplane with your hand or any metal tool, or you could shock yourself.
Statement 94
SPAs can be inserted or removed independently from the SIP. Removal of a SIP with installed SPAs is
also supported.
Figure 9-17
illustrates how to install and remove a SPA in the Cisco SCE 8000-SIP.
Figure 9-17 SPA Installation and Removal
Table 9-1 Componet Indications
This number Indicates this component
1 Cisco SCE 8000-SIP
2 1X10 GBE SPA module
270988
S
TATU
S
2
0
SPA
INTERFACE
PROCESSOR
7600-S
IP-400
S
P
A-
1
X
1
0G
E
-
L
-
V
2
S
P
A-
1
X
1
0G
E
-
L-V
2
S
TA
T
U
S
ST
AT
US
1
2

Cisco SCE 8000 Specifications

General

Brand	Cisco
Model	SCE 8000
Category	Switch
Language	English