Cisco SCE 8000 User Manual

C-6
Cisco SCE8000 GBE Installation and Configuration Guide
Appendix C Cisco Service Control Engine System Log Messages
Line Card Error Messages
Control Card Error Message %LOCAL7-3-MESSAGE_QUEUE_FAILURE "This is a five string dbg
message 1
Explanation
This message is generated when Cisco SCE fails to read the logger message from the
logger queue because the queue is corrupted. This message displays the error details of the queue,
queue index, and queue information.
Recommended Action None.
Control Card Error Message %LOCAL7-3-INIT_FAILED "Subscriber database initialization
failed."
Explanation
This error message is generated when the task of spawning the party DB manager fails.
Recommended Action None.
Error Message %LOCAL7-3-RUN_PARTIES_FAILD_NAME_DEFAULT "subscriber database load
- failed to change default subscriber name to <%s>."
Explanation
This message is generated when an error occurs while changing the default name of the
subscriber.
Recommended Action None.
Control Card Error Message %LOCAL7-3-RUN_PARTIES_FAILED_INSERT_PARTY "subscriber
database load - failed to insert subscriber <%s>."
Explanation
This message is generated when a problem occurs while inserting a new subscriber into
the party database.
Recommended Action None.
Line Card Error Messages
Line Card Error Message %LOCAL7-3-DP_SEARCH_ENGINE_FAILURE "A HW failure in the
tunneling engine has been detected. Please speak with Cisco customer support"
Explanation
This message is displayed to indicate that a hardware failure occurred in the tunneling
engine, and may cause an unusual behavior of the device.
Recommended Action None. Contact Cisco Customer Support.

Cisco SCE 8000 Specifications

General

Brand	Cisco
Model	SCE 8000
Category	Switch
Language	English