Cisco SD2008T-NA User Manual

4-26
Cisco Wireless LAN Controller Configuration Guide
OL-9141-03
Chapter 4 Configuring Controller SettingsWireless Device Access
Configuring Voice and Video Parameters
Step 7 Click Apply to commit your changes.
Step 8 To enable the radio network, click Network under 802.11a or 802.11b/g, check the 802.11a (or
802.11b/g) Network Status check box, and click Apply.
Step 9 Click Save Configuration to save your changes.
Step 10 Repeat this procedure if you want to configure video parameters for another radio band (802.11a or
802.11b/g).
Using the GUI to View Voice and Video Settings
Follow these steps to view voice and video settings using the GUI.
Step 1 Click Wireless > Clients to access the Clients page (see Figure 4-10).
Figure 4-10 Clients Page
Step 2
Click the Detail link for the desired client to access the Clients > Detail page (see Figure 4-11).

Cisco SD2008T-NA Specifications

General

Brand	Cisco
Model	SD2008T-NA
Category	Extender
Language	English