Cisco SD2008T-NA User Manual

10-28
Cisco Wireless LAN Controller Configuration Guide
OL-1926-06OL-9141-03
Chapter 10 Configuring Radio Resource ManagementWireless Device Access
Viewing Additional RRM Settings Using the CLI
Step 4 Enter this command to save your settings:
save config
Viewing Additional RRM Settings Using the CLI
Use these commands to view additional 802.11a and 802.11b/g RRM settings:
• show advanced 802.11a ?
• show advanced 802.11b ?
where ? is one of the following:
ccx—Shows the Cisco Compatible Extensions (CCX) RRM configuration.
channel—Shows the channel assignment configuration and statistics.
logging—Shows the RF event and performance logging.
monitor—Shows the Cisco radio monitoring.
profile—Shows the access point performance profiles.
receiver—Shows the 802.11a or 802.11b/g receiver configuration and statistics.
summary—Shows the configuration and statistics of the 802.11a or 802.11b/g access points
txpower—Shows the transmit power assignment configuration and statistics.
Note To troubleshoot RRM-related issues, refer to the Cisco Wireless LAN Controller Command Reference,
Release 3.2 for RRM (airewave-director) debug commands.

Cisco SD2008T-NA Specifications

General

Brand	Cisco
Model	SD2008T-NA
Category	Extender
Language	English