Cub Cadet 7360SS User Manual

115
2. Disassemble reverse shaft
1) Remove plate and remove reverse shaft
from cover D.
2) Remove snap ring , washer, gear 17T, and
needle bearings from reverse shaft.
6-3 TRANSMISSION CASE DISASSEMBLY
(1) REAR DIFFERENTIAL CASE REMOVAL
1. Remove differential lock pedal fixing bolt and
remove the pedal.
2. Remove spring pin (1), washer and spring pin
(2).
3. Pull out the shaft and remove shift fork,
cum and spring at shaft.
3. Remove fixing bolts of holder L.H. and R.H.
and lock plates. Remove holder L.H. , R.H. and
differential case assy.
Pinion shaft
Counter shaft
4WD shaft
Drive shaft
Shift fork
Differential case assy

Cub Cadet 7360SS Specifications

General

Brand	Cub Cadet
Model	7360SS
Category	Tractor
Language	English