40
(3) CYLINDER BLOCK,
CRANKSHAFT,PISTONS AND
OIL PAN DISASSEMBLY
1.Oil pan removal
(1)Turn the engine upside down.
(2)Tap the bottom corners of the oil pan with
a plastic hammer to remove the oil pan.
Do not attempt to pry off the oil pan by
inserting a screwdriver or a chisel between
the oil pan and cylinder block. Damage to
the oil pan can be the result.
(1)Oil pan
(2)Oil screen
(3)Connecting rod cap
(4)Connecting rod bearing
(lower)
Remove 5 thru 10 as an assembly
(5)Connecting rod
(6)Piston pin
(7)No.1 ring
(8)No.2 ring
(9)Oil ring
(10)Piston
(11)Connecting rod bearing
(upper)
(12)Main bearing cap
(13)Main bearing(lower)
(14)Crankshaft
(15)Main bearing(upper)
(16)Cylinder block
To Next Page
Loading...
Need help?
General