13
1-1 FRONT AXLE ASSY REMOVAL
(1) 4WD SHAFT REMOVAL
1. Remove cover A
2. Remove the snap ring at joint (rear side) from
the shaft groove.
3. Move the joint to front side and remove the
4WD shaft.
(2)STEERING HOSE REMOVAL
1.Remove the two hoses from steering cylinder
(3) BATTERY CODE DISCONNECTION
1. Disconnect Battery Code (Negative) and
loosen fixing bolts of bracket.
1. FRONT AXLE ASSY REMOVAL AND REINSTALLATION
To Next Page
Loading...
Need help?
General