4 Configuration DGS-1210 series Metro Ethernet Managed Switch User Manual
7
7
7
7
Figure 4.106 - Configuration > DDM > DDM Temperature Threshold Settings
Port: Specifies the port to be configured.
Type: Specifies the type for the operating parameter, the options are High Alarm, Low Alarm, High Warning
and Low Warning.
High Alarm: Specifies the high threshold for the alarm. When the operating temperature rises above
the configured value, the action associated with the alarm is taken.
Low Alarm: Specifies the low threshold for the alarm. When the operating temperature falls below
the configured value, the action associated with the alarm is taken.
High Warning: Specifies the high threshold for the warning. When the operating temperature rises
above the configured value, the action associated with the warning is taken.
Low Warning: Specifies the low threshold for the warning. When the operating temperature falls
below the configured value, the action associated with the warning is taken.
Vaule (-128 – 127.996): Specifies the value for the specified type of port.
Click Apply to make the configurations take effect.
Configuration > DDM > DDM Voltage Settings Threshold Settings
The DDM Voltage Settings Threshold Settings page is used to configure the DDM voltage threshold for
specific ports on the Switch.
Figure 4.107 - Configuration > DDM > DDM Voltage Settings Threshold Settings
Port: Specifies the port to be configured.
Type: Specifies the type for the operating parameter, the options are High Alarm, Low Alarm, High Warning
and Low Warning.
High Alarm: Specifies the high threshold for the alarm. When the operating Voltage rises above the
configured value, the action associated with the alarm is taken.
Low Alarm: Specifies the low threshold for the alarm. When the operating Voltage falls below the
configured value, the action associated with the alarm is taken.
High Warning: Specifies the high threshold for the warning. When the operating Voltage rises
above the configured value, the action associated with the warning is taken.
To Next Page
Loading...
Need help?
General