D-Link xStack DGS-3620 Series User Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1125
Username Group Name VerAuthPriv
--------------------------- --------------------------- ------------
initial initial V3 NoneNone
Total Entries : 1
DGS-3620-28PC:admin#
102-4 show snmp groups
Description
This command is used to display the names of groups on the switch, and the security model, level,
and the status of the different views.
Format
show snmp groups
Parameters
None.
Restrictions
None.
Example
To display the names of the SNMP groups on the switch:
DGS-3620-28PC:admin#show snmp groups
Command: show snmp groups
Vacm Access Table Settings
Group Name : public
ReadView Name : CommunityView
WriteView Name :
Notify View Name : CommunityView
Security Model : SNMPv1
Security Level : NoAuthNoPriv
Group Name : public
ReadView Name : CommunityView
WriteView Name :
Notify View Name : CommunityView
Security Model : SNMPv2
Security Level : NoAuthNoPriv
Group Name : private
ReadView Name : CommunityView

D-Link xStack DGS-3620 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3620 Series
Category	Switch
Language	English