D-Link xStack DGS-3620 Series User Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1215
Success.
DGS-3620-28PC:admin#
115-2 config sntp ipv6server
Description
This command is used to configure the SNTP IPv6 server information.
Format
config sntp ipv6server {primary <ipv6addr> | secondary <ipv6addr> }(1)
Parameters
primary - SNTP primary IPv6 server address.
<ipv6addr> - Enter the IPv6 address of the Primary SNTP IPv6 server.
secondary - SNTP secondary IPv6 server address.
<ipv6addr> - Enter the IPv6 address of the Secondary SNTP IPv6 server.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure SNTP (primary IPv6 server: 1000::1, secondary IPv6 server: 1000::2):
DES-3620-28PC:admin#config sntp ipv6server primary 1000::1 secondary 1000::2
Command: config sntp ipv6server primary 1000::1 secondary 1000::2
Success.
DES-3620-28PC:admin#
115-3 show sntp
Description
This command is used to display the current SNTP time source and configuration.
Format
show sntp
Parameters
None.

D-Link xStack DGS-3620 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3620 Series
Category	Switch
Language	English