D-Link xStack DGS-3620 Series User Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1365
Appendix E IETF RADIUS
Attributes Support
Remote Authentication Dial-In User Service (RADIUS) attributes carry specific authentication,
authorization, information and configuration details for the request and reply. This appendix lists
the RADIUS attributes currently supported by the switch.
RADIUS attributes are supported by the IETF standard and Vendor-Specific Attribute (VSA). VSA
allows the vendor to create an additionally owned RADIUS attribute. For more information about
D-Link VSA, refer to Appendix E RADIUS Attributes Assignment.
IETF standard RADIUS attributes are defined in the RFC 2865 Remote Authentication Dial-In User
Service (RADIUS), RFC 2866 RADIUS Accounting, RFC 2868 RADIUS Attributes for Tunnel
Protocol Support, and RFC 2869 RADIUS Extensions.
The following table lists the IETF RADIUS attributes supported by the D-Link switch.
1. RADIUS Authentication Attributes
Number IETF Attribute
1 User-Name
2 User-Password
3 CHAP-Password
4 NAS-IP-Address
5 NAS-Port
6 Service-Type
7 Framed-Protocol
8 Framed-IP-Address
12 Framed-MTU
18 Reply-Message
24 State
26 Vendor-Specific
27 Session-Timeout
29 Termination-Action
30 Called-Station-ID
31 Calling-Station-ID
32 NAS-Identifier
60 CHAP-Challenge
61 NAS-Port-Type
64 Tunnel-Type

D-Link xStack DGS-3620 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3620 Series
Category	Switch
Language	English