D-Link xStack DGS-3620 Series User Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
77
Example
To configure 60 seconds for user to input:
DGS-3620-28PC:admin#config authen parameter response_timeout 60
Command: config authen parameter response_timeout 60
Success.
DGS-3620-28PC:admin#
4-25 config authen parameter attempt
Description
This command is used to configure the maximum attempts for users trying to login or promote the
privilege on console or Telnet applications. If the failure value is exceeded, connection or access
will be locked.
Format
config authen parameter attempt <int 1-255>
Parameters
<int 1-255> - Enter the amount of attempts for users trying to login or promote the privilege on
console or Telnet. The default value is 3.
Restrictions
Only Administrator-level users can issue this command.
Example
To configure the maximum attempts for users trying to login or promote the privilege to be 9:
DGS-3620-28PC:admin#config authen parameter attempt 9
Command: config authen parameter attempt 9
Success.
DGS-3620-28PC:admin#
4-26 show authen parameter
Description
This command is used to display the authentication parameters.
Format
show authen parameter

D-Link xStack DGS-3620 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3620 Series
Category	Switch
Language	English