To Next Page

To Previous Page

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide

216

DGS-3620-28PC:admin# show bgp flap_statistics

Command:show bgp flap_statistics

BGP local router ID is 172.29.232.182

Status codes: s suppressed, d damped, h history, * valid, > best, i –internal

Origin codes: i - IGP, e - EGP, ? – incomplete

Network From Flaps Duration Reuse Path

*d 10.0.0.0/16 172.29.232.177 4 00:13:31 00:18:10 100 ?

*d 10.2.0.0/16 172.29.232.177 4 00:02:45 00:28:20 100 i

Total Entries :2

DGS-3620-28PC:admin#

12-48 show bgp

Description

This command is used to display BGP configuration and summary of the BGP status. If both the

IPv4 unicast and IPv6 unicast are not specified, summary information for the IPv4 unicast address

family will be displayed.

Format

show bgp {summary {[ipv4 | ipv6 ] unicast}}

Parameters

summary - (Optional) Specifies that the summary of the BGP status will be included in the

display.

ipv4 unicast - Specifies to display summary information for IPv4 unicast.

ipv6 unicast - Specifies to display summary information for IPv6 unicast.

Restrictions

None. (EI Mode Only Command)

Example

This example displays the BGP setting:

DGS-3620-28PC:admin# show bgp

Command: show bgp

BGP Global State : Disabled

Version : 4

BGP Router Identifier : 10.90.90.90

Synchronization : Enabled

Enforce First AS : Enabled

Local AS number : 100

Scan Time : 60

D-Link xStack DGS-3620 Series User Manual

Questions and Answers: