D-Link xStack DGS-3620 Series User Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
852
CRC Error 0
Late Collision 0
Excessive Collision 0
Single Collision 0
Collision 0
STP Drop 0
HOL Drop 0
COS0 HOL Drop 0
COS1 HOL Drop 0
COS2 HOL Drop 0
COS3 HOL Drop 0
COS4 HOL Drop 0
COS5 HOL Drop 0
COS6 HOL Drop 0
COS7 HOL Drop 0
DGS-3620-28PC:admin#
75-3 show utilization
Description
This command is used to display real-time port utilization or CPU statistics.
Format
show utilization [ ports {<portlist>} | groups {< grouplist >}]
Parameters
ports - Specifies to show port utilization statistics. The range of ports to be displayed is optional.
If the parameter portlist is not specified, utilization statistics for all of the ports will be
displayed.
<portlist> - Enter a range of ports to be displayed.
groups - Specifies to show group utilization statistics. The range of LAG groups to be displayed
is optional. The beginning and the end of the LAG group list range are separated by a dash.
eg: 3-4 specifies all of the LAG groups whose index is between 3 and 4. If the parameter
grouplist is not specified, utilization statistics for all of the LAG groups will be displayed.
<grouplist> - Enter a number of a group to be displayed.
Restrictions
None.
Example
To display port utilization:
DGS-3620-28PC:admin#show utilization ports
Command: show utilization ports
Port TX/sec RX/sec Util Port TX/sec RX/sec Util

D-Link xStack DGS-3620 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3620 Series
Category	Switch
Language	English