D-Link xStack DGS-3620 Series User Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1211
Chapter 114 Tech Support
Commands
show tech_support
upload tech_support_toTFTP <ipaddr> <path_filename 64>
114-1 show tech_support
Description
This command is used to display technical support information. It is especially useful for technical
support personnel that need to view the overall device operation information.
Format
show tech_support
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Note: The switch may become inaccessible when dumping the technical support data.
Note: The management session may time out if dumping technical support data takes
longer than the configured session timeout period. It is strongly recommended to
set the serial port timeout to never to disable the auto disconnection of the console
session.
Example
To display technical support information:
DGS-3620-28PC:admin#show tech_support
Command: show tech_support
#-----------------------------------------------------------------------------
# DGS-3620-28PC Gigabit Ethernet Switch
# Technical Support Information
#
# Firmware: Build 3.00.004
# Copyright(C) 2013 D-Link Corporation. All rights reserved.

D-Link xStack DGS-3620 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3620 Series
Category	Switch
Language	English