D-Link xStack DGS-3620 Series User Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1158
Example
To update user “danilo” in authentication mode:
DGS-3620-28PC:admin#config ssh user danilo authmode publickey
Command: config ssh user danilo authmode publickey
Success.
DGS-3620-28PC:admin#
104-6 show ssh user authmode
Description
This command is used to display SSH user information.
Format
show ssh user authmode
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To show user information about SSH configuration:
DGS-3620-28PC:admin# show ssh user authmode
Command: show ssh user authmode
Current Accounts
User Name Authentication Host Name Host IP
-------------- --------------- --------------- -------------
test Public Key
alpha Host-based alpha-local 172.18.61.180
beta Host-based beta-local 3000::105
Total Entries : 3
DGS-3620-28PC:admin#
104-7 config ssh server
Description
This command is used to configure SSH server general information.

D-Link xStack DGS-3620 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3620 Series
Category	Switch
Language	English