Datalogic PowerScan PD9530 User Manual

2D Global Features Enter/Exit Programming Mode
Product Reference Guide 175
2D Structured Append
Enables/disables ability of reader to append multiple 2D Codes labels in a
structured format. The structured append property is globally applied to the
following symbologies, if these are enabled:
• Data Matrix
•Aztec
•QR Code
•PDF 417
DEFAULT
$CDESA00(CR)
Structured Append = Disable
$CDESA01(CR)
Structured Append = Enable
2D Normal/Inverse Symbol Control
Specifies the options available for decoding normal/negative printed 2D
symbols. This configuration item applies globally to all the 2D symbologies
that support that feature according to Standard AIM Specification: Data
Matrix, QR, MicroQR, Aztec and Chinese Sensible Code.
To decode all symbologies, including linear symbologies, refer to "Decode
Negative Image" on page 78
$CIPNR00(CR)
Normal/Inverse Symbol Control = Normal
$CIPNR01(CR)
Normal/Inverse Symbol Control = Inverse
DEFAULT
$CIPNR02(CR)
Normal/Inverse Symbol Control =
Both Normal and Inverse
D Symbology Selection

Datalogic PowerScan PD9530 Specifications

General

Type	Handheld bar code reader
Sensor type	Laser
Tilt reading angle	0 - 360 °
Pitch reading angle	-40 - 40 °
Linear (1D) barcodes supported	-
Standard interfaces	RS-232, USB, Keyboard wedge
Connectivity technology	Wired
Product color	Black, Yellow
International Protection (IP) code	IP65
Input voltage	5 V
Power consumption	350 mA
Power source type	DC
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Cables included	No

Weight and Dimensions

Depth	110 mm
Width	74 mm
Height	212 mm
Weight	330 g