Datalogic PowerScan PD9530 User Manual

Product Reference Guide 207
WIRELESS FEATURES
This section provides options and programming related to the reader’s wire-
less communication features. Reference Appendix C, for a listing of standard
factory settings.
WIRELESS BEEPER FEATURES starting on page 210
•"Good Transmission Beep" on page 210
•"Beep Frequency" on page 210
•"Beep Duration" on page 211
•"Beep Volume" on page 212
•"Disconnect Beep" on page 212
•"Docking Beep" on page 213
•"Leash Alarm" on page 213
CONFIGURATION UPDATES starting on page 215
•Automatic Configuration Update on page 215
•Copy Configuration to Scanner on page 215
•Copy Configuration to Base Station on page 215
BATCH FEATURES starting on page 216
•Batch Mode on page 216
•Send Batch on page 216
•Erase Batch Memory on page 217
•RF Batch Mode Transmit Delay on page 217
DIRECT RADIO AUTOLINK starting on page 218
RF ADDRESS STAMPING starting on page 218
•Source Radio Address Transmission on page 218
•Source Radio Address Delimiter Character on page 219
REAL TIME CLOCK (RTC) CONFIGURATION starting on page 220
•Current Date on page 220
•Current Time on page 220
•Date Tx Format on page 221
•Time Tx Format on page 221
•Date-Time Separator on page 222
•Date-Time Transmission Order on page 223
•Power Off on page 224
•Powerdown Timeout on page 224

Datalogic PowerScan PD9530 Specifications

General

Type	Handheld bar code reader
Sensor type	Laser
Tilt reading angle	0 - 360 °
Pitch reading angle	-40 - 40 °
Linear (1D) barcodes supported	-
Standard interfaces	RS-232, USB, Keyboard wedge
Connectivity technology	Wired
Product color	Black, Yellow
International Protection (IP) code	IP65
Input voltage	5 V
Power consumption	350 mA
Power source type	DC
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Cables included	No

Weight and Dimensions

Depth	110 mm
Width	74 mm
Height	212 mm
Weight	330 g