Datalogic PowerScan PD9530 User Manual

Enter/Exit Programming Mode
226 PowerScan™ PD9530/PBT9500/PM9500
Bluetooth Security Mode
This feature enables/disables authentication and encryption of the Blue-
tooth link. Use the feature "Bluetooth PIN Code" on page 22
6 to specify the
length and digits in the PIN code used to
authenticate the Bluetooth Link.
DEFAULT
$CBTSE00(CR)
Bluetooth Security Mode = Disable
$CBTSE01(CR)
Bluetooth Security Mode = Enable
Changing the security mode setting will unlink the devices. If the Automatic
Configuration Update is set to the default “Enabled” setting, the devices must
only be relinked. If the Automatic Configuration Update is set to “Disabled,”
the Security Mode setting must also be updated in the Base Station using
Aladdin. After the Base Station has been updated, the devices must be
relinked.
Bluetooth PIN Code
After enabling Security Mode (see "Bluetooth Security Mode" on page 226),
specify whether you want to set a 4-digit or a 16-digit PIN Code. See
page 306 for detailed information and examples for setting this feature.
$CBTPS00\r
Select 4-character Bluetooth PIN Code
DEFAULT
~$CBTPS01\r
Select 16-character Bluetooth PIN Code
Select PIN Code Length

Datalogic PowerScan PD9530 Specifications

General

Type	Handheld bar code reader
Sensor type	Laser
Tilt reading angle	0 - 360 °
Pitch reading angle	-40 - 40 °
Linear (1D) barcodes supported	-
Standard interfaces	RS-232, USB, Keyboard wedge
Connectivity technology	Wired
Product color	Black, Yellow
International Protection (IP) code	IP65
Input voltage	5 V
Power consumption	350 mA
Power source type	DC
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Cables included	No

Weight and Dimensions

Depth	110 mm
Width	74 mm
Height	212 mm
Weight	330 g