Datalogic PowerScan PD9530 User Manual

Enter/Exit Programming Mode
262 PowerScan™ PD9530/PBT9500/PM9500
Quantity/Code Send Mode
This feature defines the rules that will be used to send a QTY/CODE pair:
0. Code is transmitted with QTY field (
and its predefined format) preced-
ing CODE field (and its predefined format)
1. Code is transmitted with CODE fie
l
d (and its predefined format) preced-
ing QTY field (and its pred
efined format)
2. Code in CODE field is se
nt out for the number of times defined in the
QTY field
$CPWEH00\r
Qty precedes Code
DEFAULT
$CPWEH01\r
Code precedes Qty
$CPWEH02\r
Code transmitted Qty times
Quantity/Code Separator
ThisfeatureallowstheinsertionofaseparatorbetweenQty/Codepairs.
DEFAULT
$CPWQP00\r
No separator
$CPWQP
Set Qty/Code string separator
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the barcode at
left. Next sc
an 1 digit from
Appendix D, Keypad (in
the range 1-8) representing the number of characters to
be used as separator.
Finall
y, define the separator string by reading the
desired characters from the ASCII table at the back of
this manual, expressed in he
xadecimal
form. End by
scanning the ENTER/EXIT bar code again.

Datalogic PowerScan PD9530 Specifications

General

Type	Handheld bar code reader
Sensor type	Laser
Tilt reading angle	0 - 360 °
Pitch reading angle	-40 - 40 °
Linear (1D) barcodes supported	-
Standard interfaces	RS-232, USB, Keyboard wedge
Connectivity technology	Wired
Product color	Black, Yellow
International Protection (IP) code	IP65
Input voltage	5 V
Power consumption	350 mA
Power source type	DC
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Cables included	No

Weight and Dimensions

Depth	110 mm
Width	74 mm
Height	212 mm
Weight	330 g