Datalogic PowerScan PD9530 User Manual

Enter/Exit Programming Mode
Product Reference Guide 247
DISPLAY AND KEYBOARD FEATURES
Two keyboard models are available, the 4-key model and the 16-key model.
The following section contains configuration parameters that are common
and applicable to both keypad models, unless specifically labeled as "4-key
models only" or "16-key models only”.
For more items for the 16-key model, see "Additional Features for 16-key
models," starting on page 260.
Display Operating Mode
Select the operating mode of the display. Options are:
•
Normal Mode: Display not cleared, no echo of the code on Display.
•
Local Echo: Display cleared after decode, echo of the code on display.
•
Clear display after decode: Display is cleared after decode, no echo.
$CDIMD00\r
Normal Mode = Display not cleared
$CDIMD01\r
Local echo mode
DEFAULT
$CDIMD02\r
Clear display after decode

Datalogic PowerScan PD9530 Specifications

General

Type	Handheld bar code reader
Sensor type	Laser
Tilt reading angle	0 - 360 °
Pitch reading angle	-40 - 40 °
Linear (1D) barcodes supported	-
Standard interfaces	RS-232, USB, Keyboard wedge
Connectivity technology	Wired
Product color	Black, Yellow
International Protection (IP) code	IP65
Input voltage	5 V
Power consumption	350 mA
Power source type	DC
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Cables included	No

Weight and Dimensions

Depth	110 mm
Width	74 mm
Height	212 mm
Weight	330 g