Dell S2815dn User Manual

502 Troubleshooting Guide
Print Quality Problems
NOTE: Some of the following procedures that use the Tool Box can also be performed using the operator panel or Dell Printer
Configuration Web Tool. For information on how to use the operator panel and Dell Printer Configuration Web Tool, see
"Understanding the Printer Menus" and "Dell™ Printer Configuration Web Tool."
NOTE: In some of the following procedures you may need to use the Tool Bo x, which can be opened from the Dell Printer Hub or
Dell Printer Management Tool. To start the Tool Box, see "Tool Box (for Microsoft
®
Windows
®
)."
Check if the icon is shown on the touch panel. If is shown, cancel the
envelope mode. For details on canceling the envelope mode, see "To Cancel the
Envelope Mode."
Print media misfeeds or multiple feeds
occur.
Ensure that the print media you are using meets the specifications for your printer.
See "Supported Paper Types" for more information.
Fan the print media before loading it.
Ensure that the print media is loaded correctly.
Ensure that the width and length guides of the print media sources are adjusted
correctly.
Ensure that tray1, the optional 550-sheet feeder (tray2), or the multi-purpose
feeder (MPF) unit is securely inserted.
Do not overload tray1, the optional 550-sheet feeder, or the MPF.
Do not force print media into the MPF when you load it; otherwise, it may skew or
buckle.
Ensure that the print media is not curled.
Face the recommended print side up. See "Loading Print Media in Tray1 and the
Optional 550-Sheet Feeder" for more information.
Turn the print media over or around and try printing again to see if feeding
improves.
Do not mix print media types.
Do not mix reams of print media.
Remove the top and bottom curled sheets of a ream before loading the print
media.
Load print media only when tray1, the optional 550-sheet feeder, or the MPF is
empty.
Wipe the retard rollers in tray1, the optional 550-sheet feeder, or the MPF with a
cloth moistened with water.
The envelope is creased after printed. Make sure that the envelope is loaded in the MPF as instructed in "Loading
Envelopes in the MPF."
Page breaks in unexpected places. Increase the value for Time-Out using the operator panel, the Tool Box, or Dell™
Printer Configuration Web Tool.
Print media does not stack neatly in the
output tray.
Turn the print media stack over in tray1 or the MPF.
Printing takes time when printing from the
Dell Document Hub.
Set
Print Mode to High Speed in the printer menu. See "Print Mode" for
more information.
Cannot print from tray1 or the optional 550-
sheet feeder because the print media in
tray1 or the optional 550-sheet feeder is
curled.
Load the print media into the MPF.
Problem Action

Dell S2815dn Specifications

General

Secure printing	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	7 s
Print speed (black, normal quality, A4/US Letter)	40 ppm
Duplex print speed (black, normal quality, A4/US Letter)	22 ppm
Maximum copy resolution	- DPI
Maximum number of copies	99 copies
N-in-1 copy function (N=)	2
Copy speed (black, normal quality, A4)	40 cpm
Scan to	E-mail, FTP, SMB, USB
Scanner type	Flatbed & ADF scanner
Maximum scan area	216 x 297 mm
Output color depth	24 bit
Scan speed (color)	17 ppm
Image formats supported	JPEG XR
Maximum scan resolution	9600 x 9600 DPI
Document formats supported	PDF
Faxing	Mono faxing
Fax memory	4 MB
Modem speed	33.6 Kbit/s
Digital sender	-
Maximum duty cycle	80000 pages per month
Recommended duty cycle	700 - 4000 pages per month
Page description languages	Microsoft XPS, PCL 5e, PCL 6, PDF 1.7, PostScript 3
Cabling technology	10/100/1000Base-T(X)
Authentication method	HTTP, HTTPS, TLS 1.2, SNMP (v1 / v2 / v3), MIBv2, BOOTP, DHCP, RARP, Auto IP, WINS, DNS, Bonjour (mDNS), Telnet
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Mobile printing technologies	Apple AirPrint, Dell Mobile Print, Google Cloud Print
Supported network protocols (IPv4)	IPSEC w/ IPv4
Supported network protocols (IPv6)	IPSEC w/ IPv6
Internal memory	1024 MB
Card reader integrated	No
Sound pressure level (printing)	52.9 dB
Control type	Touch
Product color	Black
Display diagonal	4.3 \
Market positioning	Business
Paper input type	Paper tray
Total input capacity	250 sheets
Total output capacity	150 sheets
Maximum input capacity	900 sheets
Multi-Purpose tray input capacity	100 sheets
Auto document feeder (ADF) input capacity	50 sheets
Paper tray media types	Plain paper, Pre-Printed, Recycled paper
Non-ISO print media sizes	Executive (184 x 267mm), Folio (media size), Legal (media size), Letter (media size), Statement (140 x 216mm)
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Standard interfaces	USB 2.0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Server operating systems supported	Windows Server 2008, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2
Operating altitude	0 - 3100 m
Storage temperature (T-T)	0 - 35 °C
Operating temperature (T-T)	10 - 32 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	15 - 85 %
Certification	EN 60950-1/IEC 60950-1; EN 55022 (Class B) EN55024 EN61000-3-2 (Class A) EN 61000-3-3 CE Mark (EU) UL 60950-1 / CAN/CSA-C22.2 No. 60950-1-07; ICES-003 (Canada) US CFR Title 47 FCC Part 2 and 15B Part 15C and Part 68 FDA/DHHS (21CFR Chapter 1 Subchapter J RCM (Australia) Telepermit (New Zealand) Singapore Mark SABS/ICASA (South Africa) NOM NYCE (Mexico) GS Mark (Germany) and other certifications required by individual country. WHQL Citrix SAP Novell YES USB Google Cloud Print Mopria AirPrint
Sustainability certificates	Blue Angel, RoHS, ENERGY STAR
AC input voltage	110 - 120 V
AC input frequency	50 - 60 Hz
Power consumption (off)	0 W
Power consumption (sleep)	14 W
Power consumption (standby)	52 W
Power consumption (average operating)	610 W

Weight and Dimensions

Depth	556 mm
Width	557 mm
Height	644 mm