4.10.3 Wiring AS04TC-A / AS08TC-A
CH 1
+
-
Shielded cable 1*
I3+
I3-
CH3
Col d con ju nctio n-
com pe nsa tion
INA
ADC
+
-
J,K,R,S,T,E,N, B
-100m V~100mV
I1+
I1-
SLD
SLD
*1. The cable connected to the input terminal should be the cable or the shielded twisted pair cable connected
to a type J, K, R, S, T, E, N, B thermocouple. It should be kept separate from other power cables and cables
that generate noise.
Note1: do not wire empty terminals.
Note2: only use copper conducting wires with a temperature rating of 60/75°C and the length must be less
than 50 m.
Note3: TC modules must run for 30 minutes before they start to take any temperature measurement.
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
To Next Page
Loading...
Need help?
General
