Delta AS132P-A User Manual

Memory Card Slot
7.3 Installing and Removing a Memory Card
7.3.1 Memory Card Slot in a CPU Module
The memory card slot is on the front side of the AS Series PLC.
AS200/AS300
AS100
7.3.2 Installing a Memory Car
d
Insert a memory card into the CPU module memory card slot and push it in until it clicks. Be sure the memory
card is fixed firmly in the slot; if the memory card is loose, it is not installed correctly. The memory card can
only be inserted in one direction. Do not force the memory card or you may damage the CPU module. The
following example uses AS300 Series PLC CPU to show you a correct way to insert the memory card.
7.3.3 Removing a Memory Card
Remove a memory card by pushing it in and the card then springs from the slot. (uses AS300 as an example)
Memory Card Slot
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com

Delta AS132P-A Specifications

General

Brand	Delta
Model	AS132P-A
Category	Network Hardware
Language	English