A.2 Installing the USB Driver for an AS Series CPU module in
Windows 7
This section describes the steps to install the USB driver for an AS Series CPU module on Windows 7. To
install the USB driver for an AS Series CPU module on another operating system, refer to the instructions in the
operating system for information about installing new hardware.
Before you install the USB driver, you must install ISPSoft version 3.00 or above on your computer.
Supply power to the AS Series CPU module. Connect the AS Series CPU module to a USB port on the
computer with a USB cable.
(1) Windows detects the module. From the Windows Control Panel, open the Device Manager. The name of
the USB device appears in the Device Manager window. Double-click the AS300.
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
To Next Page
Loading...
Need help?
General
